Coolant bottle ??

Started by nvdranger, April 25, 2004, 01:04:19 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

nvdranger

April 25, 2004, 01:04:19 PM
Like I said in a previous post the guy that tried to fix her before pulled the bottle off.  I just got almost all of that grease like substance out of the bottle and am trying to reinstall it on the bike.  However, I'm not sure how the hoses need to be ran, the bikes torn apart so hoses are everywhere.  I couldn't find anything in the haynes manual or on any sites.  Can someone please tell me where the two hoses that connect to the bottle come from?

Thanks
Ken
'82 Vision project.  First Vision, First Bike.
Sometimes monkeys die, Sometimes monkeys die.  It not a good saying, but its a saying.

Bruce

#1
April 25, 2004, 03:43:32 PM
The hose from the bottom of the overflow can goes to the top of the rad right at the cap. The top hose of the overflow is just a drain line and runs down to a low spot on the frame in case the bottle itself overfills.

Bruce.

nvdranger

#2
April 25, 2004, 03:48:00 PM
oo..thats why that hose was still attached to the bottle.  When I get off work I will have to find the hose that goes to the bottom of the bottle.  Thanks

Ken
'82 Vision project.  First Vision, First Bike.
Sometimes monkeys die, Sometimes monkeys die.  It not a good saying, but its a saying.
Print
Go Up Pages1
User actions