Ignition Switch

[PeteXS/GS/CB/XZ]

I picked up an ignition switch for my recently acquired '82 Vision that needed one, then noticed that someone had hacked off the female terminal block for it that comes out of the headlight.  There are four exposed wires for this female connector: two red, one blue, and one brown.  Do I double both reds into one terminal block connector ?

[Lucky]

the reds should be joined together on the harness side of the connector. that being said, one of the reds goes to the fan relay, & it should have a 10A fuse inline. the other fuse goes to the 30A main fuse.

--Lucky