Resurrecting my 1983 Vision and wanted to ask how others have replaced/fixed the broken plastic front carb drain nipple that points down? There doesn't seem to be a specific part number to this plastic piece.
Thanks for any help!
An easy fix would be to plug the broken part and then put a 'T' connector on the line that connects both carb drains and connect the front end of that line to the other (unbroken) front nipple. The down part of the 'T' would then be used to connect to the main drain line which runs down the frame on its way to the never-never (outback).
Having broken one of these myself, the T breaks off at the float bowl and you have to remove the broken stub and replace the whole thing. I was in the process of replacing the carbs and didn't worry about fixing it but it still pissed me off. I have heard of aquarium parts as a source but can't confirm.
If the entire fitting is snapped off it would probably be best to replace it with a metal nipple from an old carb - almost any old carb. Metal would be best because it would be fuel safe and not degrade. They (nipples) are usually just an interference fit and can be easily removed by heating the carb with a torch and tugging on the nipple ( :-) ). Of course the size would need to be right or the hole drilled ( :-) ) to suit the new nipple.
0.2mm interference would probably do the trick, but someone else may know better.
While I was trying to make my carbs functional one of those T fittings broke off, so I took a piece of brass tubing (easily available at hardware and hobby(model) stores) and heated it so it melted the plastic body of the fitting and the brass tube slipped in where the plastic cooled and hardened around the brass. Once the thing has cooled just cut the brass tube to the desired length. I repaired a couple of these before I started adapting "new" carbs. It is a fairly simple and easy process that saves the part.
Thanks for all the replies! When I get the carbs off, I will see which option might work best and report back.
And report back . . . . . it's been a while, any report?
This should work: https://www.acehardware.com/departments/lawn-and-garden/watering-and-irrigation/drip-irrigation-fittings/7004088 (https://www.acehardware.com/departments/lawn-and-garden/watering-and-irrigation/drip-irrigation-fittings/7004088)