My job is about to change so I no longer need the Vision.
If anyone is interested, drop me a line here or at stu2@ntlworld.com
Good condition, MOT and Tax until April, approx. 15k miles. Serviced about 2K miles ago.
Recent new parts - Electrex stator, new Yamaha R/R, starter relay and the starter motor bushes were replaced approx. 6 months ago and the spring seal fitted.
Basically all the little niggles sorted!!!
A big thanks to the board for helping me sort these little problems and especially to CanadianLouie for helping me track down a spring seal.
Hi,
I've been looking to buy a Vision for some time and wondered how much the 400 differs from the 550. Is it merely a smaller bore? or is the stroke/ valves etc different. There are far more
400's here in NZ than 550's.
Kind regards
Glyn Pickering
Auckland, NZ
Smaller bore, shorter stroke and different primary gear. Somebody, maybe it was Biaggi, posted a spec sheet a while back.
HOw many teeth on the priamary gear on XZ400??
Ooo - I got all excited when I saw 3 replies! ;-)
Look here for spec:
http://home8.highway.ne.jp/crowsinn/garage/no10/xz40_04.htm
You can just about work it out. Put `Yamaha XZ400` in google and you get some interesting sites back.