Changing flashers to led versions, problems with wiring

[b_racuda]

If I change led flashers to my Vision how do I connect the new relay? There are three wires coming to old relay, brown, yellow green and brown white. The new relay has three connections, earth, positive in and positive out.

I know that brown comes to new relay positive in. How about the other two, one goes to the flasher cancelling unit (yellow green) and other to the flasher switch (brown white). I assume that the brown white, which goes to the flasher switch is positive out. So is the yellow green the earth?

[b_racuda]

And the answer to my own question (after searching the internet), Japan flasher relay has three connections:
B=incoming constant 12V positive
L=outgoing 12V which is not constant
E=earth

After checking Visions relay the connections are following:
B=brown
L=brown white
E=Yellow green

[Guerrero]

im going to change to led too.There should be only one relay?or one for each side?

[b_racuda]

Just one relay.

[sunburnedaz]

Does the self canceling feature still work?

[b_racuda]

Unfortunately I don't have self cancelling unit installed. I noticed it yesterday when putting everythin back together. Maybe I have to find it from Ebay.

[The Prophet of Doom]

I thought the Euro bikes didn't come with a self cancelling unit, then checked the Fiche and it's listed for Finland variations.  Do you know if yours is a Finland model?

If yours didn't come with self cancelling from factory, there are some parts needed to retrofit - the left hand switchgear, the speed sensor in the speedo, the self cancelling unit, and probably a bunch of wireing.