leaky front end

Started by wilson, March 10, 2009, 09:15:10 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

wilson

March 10, 2009, 09:15:10 PM
hello out there. i nead help i am trying to replace the front fork seals on my love affair.but i can get the damper rod bolt lose. is there a tool to hold it inside? if so what is it. a hex,bolt,pin what. it sucks it's all apart in the garage and i want to ride!

Night Vision

#1
March 10, 2009, 09:41:31 PM



upside down 9/16" bolt with two nuts (1 jam nut) duct taped to an extension
if it ain't worth doing it the hard way....
it ain't worth doing it at all - Man Law
;D


if it ain't broke..... take it apart and find out why


don't give up.... don't ever give up - Jimmy Valvano

Rick G

#2
March 10, 2009, 11:55:56 PM
You can buy a set of socket type holders with allen type tips built in. I use an air wrench , but if you don't have one or a compressor to run it with, Think about buying an electric impact. If you don't want to invest in a new one, look in thrift stores and  used tool/junque shops for an electric one . It will prove very handy. .
Rick G
Go soothingly on the grease mud, as there in lurks the skid demon
'82.5 Yamaha XZ550 RJ  Vision,
'90 Suzuki VX800, 1990 Suzuki DR350.
'74  XL350   Honda , 77 XL350 Honda, 78 XL350 Honda, '82 XT 200 Yamaha, '67 Yamaha YG1TK, 80cc trail bike

YellowJacket!

#3
March 11, 2009, 09:36:41 AM
Here you go wilson, check out this post:
http://ridersofvision.net/forum/index.php?topic=7075.0

David


Living the dream - I am now a Physician Assistant!!   :-)

wilson

#4
March 11, 2009, 08:06:33 PM
 :)thanks folks all better now used a bolt and two nuts worked great thank you got one done before dinner.planed on painting tube tonight let!
Print
Go Up Pages1
User actions