News:

Ridersofvision.net  welcomes you !

Main Menu

All the lights on but not necessarily in the right order!

Started by legacybrg, September 07, 2020, 12:15:22 PM

Previous topic - Next topic

legacybrg

Bike electrics not being my forte, help needed. Neutral light on all the time, oil/ignition light off before starting then flashes on when the clutch is pulled-in to change gear! I've cleaned the contacts under the L/H crankcase cover and the connectors inside the headlamp shell. Any educated ideas?

fret not

This sounds like time to refer to a wiring diagram.  You DO have one, right? 
It MAY be the NEUTRAL SWITCH is connected to the wrong wire. 
Clutch 'lock out safety' switch too. 

Probably need a Volt/Ohm meter to check how the electrons flow.
Retired, on the downhill slide. . . . . . . . still feels like going uphill!

MikeScoot

Yeah, sounds like those electrons are not where they should be.
You can find a wiring diagram in one of the service manuals for which there are links in Tech-Talk>Resources  http://ridersofvision.net/rovforum/index.php?topic=12221.0
You'll also need a multimeter which you may have, or get from a DIY store or online.

Another option would be to get an auto electrician or friend to look at it.

I'd probably start by looking for any wiring inside the headlight housing which seems to have been tampered with.

Good luck!
Both Luthers had their dreams,
But I've just got one Vision.
Theirs got them into strifes,
Mine just takes me fishin'.