News:

We rely on our supporters to help keep us running. Thank You!

Main Menu

Fairing swap advice, parts list

Started by VisionWC, March 26, 2021, 04:02:58 PM

Previous topic - Next topic

VisionWC

I have an 82 with the shark fairing and would like to know that parts I need to swap for the full fairing. It seems there are three parts to the fairing itself (center bit with the windshield and the two vents down the side) and different turn signals but what else do I need?


Thanks in advance!

jefferson

You will need the mounts which consist of one on each side and the mount for the center section of fairing. You will need the short handlebar risers if you don't already have them as well as the wiring loom and parts for the oil filler. Right now that's all I can come up with.

The Prophet of Doom

#2
Check out the 11k Fairing Supplement on the resources post.  It will show you all the parts needed
XZ550 and XZ400 resources (ridersofvision.net)


VisionWC


WGuaire

My 1983 has the lower fairing off today. There's this bracket for holding the fairing. If you don't have one, you might want to add it.