Stripped Driveshaft Bolt.

[[jh]]

I have a stripped driveshaft oil fill bolt. The threads on the inside are stripped so the bolt won't back out, any ideas on how to get that out? I searched the interweb but found nothing that seemed like it would work. ??? ???

[fiat-doctor]

Well, bummer... it's not likely the steel bolt... more likely the aluminum housing.  Try putting visegrips on it so you can pull out as you turn.  Or tip the socket to the side as you turn.  Or with the help of an assistant, try to pry with a screwdriver as you turn. 
Good luck,
                  Steve

[[jh]]

Ya I'm sure it's the housing, I tried the vise grip technique but no luck.

[Lucky]

the only way to get it out will be as suggested: get a couple of screwdrivers under the head of the bolt & back it out, keeping pressure on it.  it won't come out because the threads are stuck in the bolt.  this is a 3 handed operation, so get some help.

it might take some force to get it out, & even if you strip it further, that's ok, most auto parts stores have those red carded "Help" products & they sell self tapping, oversize bolts for automotive drain plugs...

[[jh]]

Ok thanks, I will give it a more aggressive attempt, will let you know.