Text only | Text with Images

Riders Of Vision

General => General Board => Topic started by: ken on April 16, 2014, 06:40:05 PM

Title: case guards
Post by: ken on April 16, 2014, 06:40:05 PM
Anyone still make them? How about fit a set from something else?
Title: Re: case guards
Post by: Jimustanguitar on April 17, 2014, 08:03:52 AM
You can still find the originals. I bought a set from the swap shop on this forum last summer.
Title: Re: case guards
Post by: Rikugun on April 17, 2014, 08:27:18 AM
Every once in a while they show up on Ebay too. Between here on the forum and E-bay I found a rear rack and engine guards.
Title: Re: case guards
Post by: ken on April 17, 2014, 12:50:05 PM
Thanx. I'll add booth to my "trap line" ;D
Title: Re: case guards
Post by: Blake on April 17, 2014, 04:09:54 PM
I never got a chance before i threw mine out after a wreck-  But what is the diameter of the tubing?  I have a bender that can do up to 7/8" tubing.  Probabaly will have to bend a simple one up once I get the carbs straightened out.  Saved my leg once, i'd like to keep it again.
Title: Re: case guards
Post by: Tiger on June 10, 2014, 07:51:46 PM
Hmmmmm, I do believe I have a set in my loft...if your still interested 8)


                 
8) ....... TIGER .......  8)
Title: Re: case guards
Post by: fret not on June 11, 2014, 01:39:52 AM
Cheers, John. ;)  Good to see you around.
Title: Re: case guards
Post by: Tiger on June 12, 2014, 07:03:17 AM
Quote from: fret nut on June 11, 2014, 01:39:52 AM
Cheers, John. ;)  Good to see you around.

Thanks fret...I still pop by now and again ;)

John.
Text only | Text with Images