Text only | Text with Images

Riders Of Vision

General => General Board => Topic started by: VFan on April 04, 2011, 08:06:23 PM

Title: 101 uses for YAMABOND?
Post by: VFan on April 04, 2011, 08:06:23 PM
If I remember correctly, it's been a couple of years since I purchased my tube of YAMALUBE. I bought it to seal the wires for my rebuilt stator. At the time I took note of the line item on the directions "For best results, contents of this tube should be used within one year of purchase." So here it is 2 years later and I haven't used any of my YAMALUBE since using that initial dab. I can already tell that my $12 tube is going to go to waste.

So with the intent of using my YAMALUBE before it drys up, other than for gasket forming what do you use it for?
Title: Re: 101 uses for YAMALUBE?
Post by: Rikugun on April 04, 2011, 08:53:39 PM
You didn't say which one you have but davexz used #5 to seal his YICS so there is one for ya!  :D
Title: Re: 101 uses for YAMALUBE?
Post by: VFan on April 04, 2011, 09:12:54 PM
I had forgotten about the #s. I have #4.

Thanks
Kent
Title: Re: 101 uses for YAMALUBE?
Post by: Walt_M. on April 05, 2011, 06:16:56 PM
I believe you are referring to YamaBOND. Big difference.
Title: Re: 101 uses for YAMALUBE?
Post by: Rikugun on April 05, 2011, 06:21:07 PM
Yes, I think we knew what he meant ;)

Yamabond is what you seal the stator wires with to keep the Yamalube from escaping!  :D
Title: Re: 101 uses for YAMALUBE?
Post by: VFan on April 05, 2011, 10:14:31 PM
Quote from: Walt_M. on April 05, 2011, 06:16:56 PM
I believe you are referring to YamaBOND. Big difference.

Whoops! You're right. I have a big tube of YAMABOND 4 still sitting in my toolbox.
Text only | Text with Images