how do I get the clutch cable off ?

Started by GT @ oh., January 03, 2007, 04:51:11 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

GT @ oh.

January 03, 2007, 04:51:11 PM
Got the stator cover lose need to disconnect cable . Do I just spread the jaws apart ..(remove)..then squeeze back ..(to assemble).             sorry for the dumb q's

h2olawyer

#1
January 03, 2007, 05:18:30 PM
Do dumb questions here - just dumb mechanics!   ;D  (just kidding)

There's a tab that gets bent out of the way to release that end of the clutch cable.  You are correct in the procedure.  Last time I did mine, it felt like the metal was suffering some fatigue - it bent with less force.  going to see if there is an alternate method of bending the tab or attaching the cable next time I do mine.

H2O
If you have an accident on a motorcycle, it's always your fault. Tough call, but it has to be that way. You're in the right, and dead -on a bike. The principle is not to have any accident. If you're involved in an an accident, it's because you did not anticipate. Then, by default, you failed.
Print
Go Up Pages1
User actions