Main Menu

XZ400

Started by Robin Hood, April 15, 2007, 09:26:06 PM

Previous topic - Next topic

Robin Hood

I have removed the engine from my XZ400 and have noticed some tiny cracks on the left hand crankcase.



The engine does not appear to have been damaged. Has anyone encountered cracks like these?

Lucky

probably someone here is better qualified to answer this, but i believe those are from the casting process & aren't anything to worry about, i think they are superfical.  do they leak oil?

--Lucky
1982/3 XZ550 Touring Vison, Gold on Black

kiawrench

i think Lucky is right, but there is a way to check it out -

use a bit of sandpaper, in finer and finer grits to "cut down " the ridges, then polish that section if they are cracks that you need to worry with, they will still be visible after polishing .

after doing this, ,and if the case is solid, you may as well polish the entire engine, then apply a high temp sealer topcoat to keep it pretty for a while .
keep your bike running,your beer cold ,and your passport handy.all are like money in the bank .

Robin Hood

No I don't think they leak oil. I think I might try sanding them and see if the cracks disappear.